The Mug Machine - SN0351

Product Information

• Print 4 mugs at a time
  
• Super fast production
• 12 months swap out warranty!
• Low set up & running cost
• Available next working day.

So, why should you use the Mug Machine instead of a mug press?

Well, we believe that ideally, in the long term most business involved in mug printing should have both a press & and an oven.

Mug presses are good for one offs, and samples, but are quite labour intensive when it comes to production. Lets say you have a run of 100 mugs to print, that's 100 individual cycles of usually 3-4 minutes or more per mug.

The mug machine however, is a halogen oven based system. You load 4 mugs at a time, and heat for 12-20 minutes, 3-5 minutes per mug, depending on room temerature, type of mug etc. This means you're only spending time loading the oven once for every four mugs, which frees you up to spend more time running your business - or means your staff can get a lot more done in the same amount of time, rather than having to be stood by the press to re-load every 3-4 minutes.

The Mug Machine wouldn't be as ideal for you if you're always producing one or two mugs at a time, in this case a mug press would probably suit you better.

So, Ideally you would have a mug press for when you just need to do one or two mugs, for example if you have a customer waiting, or if you just want to run off a couple of samples - and a mug machine for when you want to produce in larger volume.

Plus, this way if you have a rush job, you can use both the press & the oven at the same time & produce even faster.

When you get a mug press, you need to get a good one, that will give you good results & that will not cause you problems, and from a reputable supplier

But, as the convection oven system is less expensive to produce, the cost of the Mug Machine is right at the bottom of the scale compared to mug presses, it is sold with a next working day swap out warranty.

** selection may vary due to availability

Price: £249.00

• Tell a Friend